❤ 30 jours pour l'aimer ou le retourner
🚛 Expédition gratuite à partir de 79€
🔒 Paiement sécurisé
❤ 30 jours pour l'aimer ou le retourner
🚛 Expédition gratuite à partir de 79€
🔒 Paiement sécurisé
Before Polaroid created integral instant film, they made manually processed, peel-apart film. In 1973, they introduced 8×10, a large-format film which creates photos of incredible quality. It’s more complex than traditional instant film formats, but there’s nothing like it, which is why it’s still being made by hand today.
Temperature affects how the film works. Keep it stored cold in the fridge, but never freeze it. Ideally you should let it adjust to room temperature before you use it. That’s around 55–82°F (13–28°C). When it’s cold out, keep your
photos warm in a pocket close to your body while they develop. Or if it’s a hot day, make sure they stay cool.
The more light in your shot, the better your photo will turn out. Instant film loves light,
especially natural light. Use the flash for all your indoor photos. For best results we also
recommend using the flash for outdoor shots, unless it’s a bright sunny day.
All photos appear blank at first. They’re most sensitive during this time, so don’t bend or shake them. Shield them from the light, and place them face down as they develop. Keep B&W photos shielded from light for about 1 minute, and color film for about 6 minutes.
Your camera has a set of rollers inside the film door. Each photo passes through these rollers as it’s made, so it’s important to make sure that they stay clean. If the rollers get visibly dirty then gently wipe them down with a soft, damp cloth.
8×10 Film Holder & Processor